Products

  • Multi-Parameter Joint Water Sampler

    Multi-Parameter Joint Water Sampler

    The FS-CS series Multi-parameter Joint water sampler was independently developed by Frankstar Technology Group PTE LTD. Its releaser applies the principle of electromagnetic induction and can set a variety of parameters (time, temperature, salinity, depth, etc.) for programmed water sampling to achieve layered seawater sampling, which has high practicability and reliability.

  • Frankstar S30m multi parameter integrated ocean observation big data buoy

    Frankstar S30m multi parameter integrated ocean observation big data buoy

    The buoy body adopts CCSB structural steel ship plate, the mast adopts 5083H116 aluminium alloy, and the lifting ring adopts Q235B. The buoy adopts a solar power supply system and Beidou, 4G or Tian Tong communication systems, owning underwater observation wells, equipped with hydrologic sensors and meteorological sensors. The buoy body and anchor system can be maintenance-free for two years after being optimized. Now, it has been put into the offshore water of China and the middle deep water of the Pacific Ocean many times and runs stably.

  • Frankstar S16m multi parameter Sensors are integrated ocean observation data buoy

    Frankstar S16m multi parameter Sensors are integrated ocean observation data buoy

    Integrated observation buoy is a simple and cost-effective buoy for offshore, estuary, river, and lakes. The shell is made of glass fibre reinforced plastic, sprayed with polyurea, powered by solar energy and a battery, which can realise continuous, real-time and effective monitoring of waves, weather, hydrological dynamics and other elements. Data can be sent back in the current time for analysis and processing, which can provide high-quality data for scientific research. The product has stable performance and convenient maintenance.

  • S12 Multi Parameter Integrated Observation Data Buoy

    S12 Multi Parameter Integrated Observation Data Buoy

    Integrated observation buoy is a simple and cost-effective buoy for offshore, estuary, river, and lakes. The shell is made of glass fibre reinforced plastic, sprayed with polyurea, powered by solar energy and a battery, which can realise continuous, real-time and effective monitoring of waves, weather, hydrological dynamics and other elements. Data can be sent back in the current time for analysis and processing, which can provide high-quality data for scientific research. The product has stable performance and convenient maintenance.

  • Mooring Wave Data Buoy (Standard)

    Mooring Wave Data Buoy (Standard)

    Introduction

    Wave Buoy (STD) is a kind of small buoy measuring system of monitoring. It is mainly used in offshore fixed-point observation, for the sea wave height, period, direction and temperature. These measured data can be used for Environmental monitoring stations to count estimation of the wave power spectrum, direction spectrum, etc. It can be used alone or as the basic equipment of coastal or platform automatic monitoring systems.

  • Mini Wave Buoy GRP(Glassfiber Reinforced Plastic) Material Fixable Small Size Long Observation Period Real-time Communication to Monitor Wave Period Height Direction

    Mini Wave Buoy GRP(Glassfiber Reinforced Plastic) Material Fixable Small Size Long Observation Period Real-time Communication to Monitor Wave Period Height Direction

    Mini Wave Buoy can observe the wave data in short-term by the way of short-term fixed-point or drifting , providing stable and reliable data for Ocean scientific research, such as wave height, wave direction, wave period and so on. It can also be used to obtain section wave data in ocean section survey,and the data can be sent back to the client through Bei Dou, 4G, Tian Tong, Iridium and other methods.

  • Frankstar Wave Sensor 2.0 to Monitor Ocean Wave Direction Sea Wave Period Marine Wave Height Wave Spectrum

    Frankstar Wave Sensor 2.0 to Monitor Ocean Wave Direction Sea Wave Period Marine Wave Height Wave Spectrum

    Introduction

    Wave sensor is a completely new upgraded version of the second generation, based on the nine-axis acceleration principle, through the completely new optimized sea research patent algorithm calculation, which can effectively obtain the ocean wave height, wave period,wave direction and other information. The equipment adopts a completely new heat-resisting material, improving product environmental adaptability and greatly reducing the product weight at the same time. It has a built-in ultra-low power embedded wave data processing module, offering RS232 data transmission interface, which can easily be integrated in the existing ocean buoys, drifting buoy or unmanned ship platforms and so on. And it can collect and transmit wave data in real time to provide reliable data for ocean wave observation and research.There are three versions available to meet the needs of different users: basic version, standard version, and professional version.

  • Portable Manual Winch

    Portable Manual Winch

    Technical Parameters Weight: 75kg Working load: 100kg Flexible length of lifting arm: 1000~1500mm Supporting wire rope: φ6mm,100m Material: 316 stainless steel Rotatable angle of lifting arm:360° Feature It rotates 360°, can be fixed portable, can switch to neutral, so that the carrying falls freely, and it is equipped with a belt brake, which can control the speed during the free release process. The main body is made of 316 stainless steel corrosion-resistant material, matched with 316 sta...
  • FS – Circular Rubber Connector

    FS – Circular Rubber Connector

    The circular rubber connector designed by Frankstar Technology is a series of underwater pluggable electrical connectors. This type of connector is widely regarded as a reliable and robust connectivity solution for underwater and harsh marine applications. This connector is available in four different size enclosures with a maximum of 16 contacts. The operating voltage is from 300V to 600V, and the operating current is from 5Amp to 15Amp. Working water depth up to 7000m. Standard connectors ...
  • ADCP/Five-beam Acoustic Doppler Current Profiler/300-1200KHZ/Stable performance

    ADCP/Five-beam Acoustic Doppler Current Profiler/300-1200KHZ/Stable performance

    Introduction The RIV-F5 series is a newly launched five-beam ADCP. The system can provide accurate and reliable data like current velocity, flow, water level, and temperature in real time, effectively used for flood warning systems, water transfer projects, water environment monitoring, smart agriculture, and smart water services. The system is equipped with a five-beam transducer. A 160m additional central sounding beam is added to strengthens the bottom tracking ability for special environm...
  • High Accuracy GPS Real-time communication ARM processor Wind buoy

    High Accuracy GPS Real-time communication ARM processor Wind buoy

    Introduction

    Wind buoy is a small measuring system, which can observe the wind speed, wind direction, temperature and pressure with the current or in fixed point. The inner floating ball contains the components of the whole buoy, including weather station instruments, communication systems, power supply units, GPS positioning systems, and data acquisition systems.The collected data will be sent back to the data server through the communication system, and customers can observe the data at any time.

  • Self Record Pressure and Temperature Observation Tide Logger

    Self Record Pressure and Temperature Observation Tide Logger

    HY-CWYY-CW1 Tide Logger is designed and produced by Frankstar. It is small in size, light in weight, flexible in use, can obtain tide level values within a long observation period, and temperature values at the same time. The product is very suitable for pressure and temperature observation in nearshore or shallow water, can be deployed for a long time. The data output is in TXT format.

1234 Next > >> Page 1 / 4